The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Caster Measurement 200 1993

After doing all of my bushing work I took the car in to be aligned today. My caster is out of specification on the left side at 2.7 degrees. Right side is 3.2 degrees. I don't seem to have any major pulling or drifting problems.

The shop I went to - actually a SCCA race prep shop - said that the 2.7 degrees wasn't that bad and that they wouldn't worry about it yet. I think it needs to be at least 3.0 degrees to be in spec. His guess to a cause was that the strut mounts are looking pretty worn and in fact show cracking on both sides. He said that would be the most obvious thing to address first, but suggested I wait until they start making some noise.

Anyone have any experience with caster issues?

The other possibilities are ball joints (still seem ok) and "something bent"






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.