The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Modifying 91 945t 900 1991

I have a 91 945T wagon with the B230ft
I have had the car since i bought it new, i love it and i dont want to have to part with it. that said, the car is up to 130k, i know this is the point near where the turbo usualy fails on these cars. In a recent test i found that i'm getting 95% of spec compression on 3 cylinders (1,2,4) and only 75% on number 3. The car still runs great and has lots of power.

I wanted to get some opinions on where to go with the car from here. I'm trying to figure out if it would be better to go with a new block or bore this one out. i have wanted to convert the engine to a 2.5L, and do a number of other mods to it.

I have a modified Hybrid KKK turbo sitting in a box in my garage for the engine. I would like to put a 3" turbo back exaust onto the car. from looking around i havent found any one who has done this but i was wondering about putting the 16V head onto the b230/250ft block

I have been told that because the engine has a very short stroke, the engine if in good condition is easily capable of 7.5-8k rpm. the only ECU i can find that could allow for this is the one from BSR (http://bsrab.se/products/n339/t772/)

I run the front end (service writer) for a honda rice shop, the guys in the back all owe me favors so i'm only looking at costs of parts. (no labor costs)
however i have no clue where to find anything other than IPD
please clue me in on where to get parts and possibly an idea of a complete system. i'm looking to go to 240-280HP without running over 13lb of boost

many thanks






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.