The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

940SE Saga continues

Well I got the head off today. I have a bigger problem. I found that No 1 piston has a serious problem. A portion of the top of the piston is melted away down ,to the top piston ring, directly a the point were the exhaust port is located. Also noticed a similar problem but not as severe is developing on the opposite side of the piston on the intake side. I will take pictures and try and post them this weekend. I have never seen anything quite like this before. The other pistons are normal.

I plan on boring and installing new pistons, change the bearings and probably the oil pump. I have purchased a rebuilt head so just about everything will have been changed on the engine when I get through at lot more than I had planned on, but the car is more than worth what I will spend on it.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.