The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

93 960 No start but starts when 1 plug is removed STRANGE!

So, pulling one of the spark plug wires doesn't help, only pulling the plug itself helps?

I'm wondering if the plug wires connected correctly. All I can think of is that if a cylinder is not getting spark at the right time, it is of course not contributing. Removing the plug from the hole is maybe reducing backpressure from the compression stroke enough to allow the few correctly timed cylinder ignitions to turn the engine in a crippled state.

Ensure that your wires are connected correctly, and then have an assistant put a timing light on each wire while cranking, to ensure that spark is being delivered through each wire.

--
David Armstrong - '86 240(350k km?), '93 940T(270k km), '89 240(parts source for others) near Toronto






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.