The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Bad Amm? Testing

Greg,

I thought I had AMM problems for a while (which turned out to be O2 Sensor) and here's what I learned.

1. When you unplug the AMM, the idle should become noticable rough... This is called "limp home" mode, where you CAN drive it, but it will run poorly.

2. Make sure you are checking voltage, not testing the circuit... In other words, make sure you arent sending a voltage TO the AMM instead of reading the voltage FROM the AMM (I've heard that this can damage the ECU)

3. What's the condition of the eBay purchased AMM? Here it is: If you unplug the "original" AMM without a change in idle, then you install (and unplug) the "ebay" AMM and the same result? Probably the eBay one is no good, and I feel bad tellin you that because it sucks you know?

I hope this helps a little, If I were you, I'd look on some of the 700/900 FAQ websites as the AMM works exactly as it does with B230F engines in the 7/9 models as well...

Happy trails and best of luck

Spencer






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.