The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Redline for a B20F? 140-160

So what is the journal size of the B230 rods. I know the B20/21 and early B23 mains are 55mm, and from '88 or so, they changed to the larger 63mm main bearings. I dont have any info on the big end sizes, but you say the B230 has smaller big end journals? So one could (off-center?) grind a stock B20 crank to a smaller size and fit B230 conrods? Is that what you mean?
If so: are the B230 conrods shorter (center-to-center) to be able to use the stock B20 24mm whrist pin pistons? Or would you need special shorter compression pistons (which would then be 2.5mm shorter)? (or is the whrist pin size different to start with?)
I've been looking into stroking a B20, so I'm eager to find out. All info would be appreciated!

Cheer, Ben
--
P131, '65, B20B+M47. P131, '69, B20E+AW71L+LSD. (www.tinustechniek.tk)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.