The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Running on 3 and low idle speed when cold - 200 1981

Okay, the misfire is cured, found No2 injector seals were suspect. Replaced both seals on all four injectors.Cleaned the areas where the seals are meant to do their job. There were deposits to be removed. Probably a buildup over the years.

The low cold idle problem.

This is on the B23E with the k-Jetronic CIS system.
Essentially, when starting cold, the idle is approx. 650 -700 rpm. When up to operating temp. the idle sits just under 1000rpm.

Living in a colder area ( compared to the rest of Australia ), it's essential for a good cold start.

The engine starts easily enough when cold, a couple of turns of the crank and it's away, but the low idle speed is accrentuated when selecting drive or reverse, dropping to approx. 500rpm. This can't be right !

Any suggestions on where to start would be appreciated. Thanks.
cheers
richo






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.