The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

RPM Sensor - 1 hour into 10-minute job 200

posted by  someone claiming to be Zach on  Tue May 17 02:57 CST 2005 [RELATED]

Hello ladies and gents -

Went out to replace the RPM sensor on my '90 245 with 223k miles last evening. Disconnect from the harness, remove the 10mm bolt, give it a wiggle - no dice. Wiggle with light tug on cable - still good and tight. Frustration starts to set in.

Cro-magnon brain starts to take over - pull harder on cable while wiggling - at least now have cable removed, but sensor still firmly planted on bellhousing. Try screwdriver to lever it out - still no luck. Grab chanel-lock pliers and liquid wrench and heat gun - one last try - but to no avail.

What am I not thinking of? Should I resort to explosives?

Cheers - Zach






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.