The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Help on pulling auto trans from Jyard for a 240

posted by  someone claiming to be robert2 on  Tue Jun 14 04:49 CST 2005 [RELATED]

Okay, I am getting more nervous as the time to do this job gets closer.
Do you think the Elring seals from fcpgroton are okay? Do I do just the seal or the seal housing gasket too? I am going to have the gasket on hand either way. Is taking off the flywheel that easy? I have only worked on older cars where the flywheels weighed like a ton. Is the engine going to drop enough when I undo the trans mount and crossmember for me to do all of this? And where do I look on the trannys to determine if they are both 'L' or not? The new one is stamped Aisin on the starter area.
Again thanks. If this goes well I have two other 240's that need the same thing done that I will finally be able to tackle.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.