The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

need help accessing front door hinges 240 200

Strangely enough, neither do my Volvo "Green" book help much. All they say is "remove the hinges....."

I think you have to remove the panel that surrounds the fuse panel, and maybe the fuse panel itself. BE SURE that the battery negative cable is disconnected first.

Before loosening the hinges, mark the location of the hinge on both of the "A" pillar and on the door so you can get the adjustment close when installing.

You will want to remove the door sill, (hard upward pull alternating between front and rear) and the front part of the black U-Shaped molding that goes all around the door over the welded seam. There may be some metal clips inside it - they are sharp.

There are also some clips on that side panel, under the molding. those clips are sharp, too.

Before you get the door loose, have all the wires and things disconnected, there are connectors. Support the door, I understand its 30 to 40 pounds.

Good Luck,

Bob

:>)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.