The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

need help accessing front door hinges 240 200

If replacing on the passenger side, remove the plastic kick panel in the right footwell. To do this, pull up hte plastic sill cover, tehn pull away the flexible plastic gasket, trim or whatever you want to call it that covers the pinch welded seam up along teh dorr opening. You will then probably see a small metal clip or two holding the front edge of the plastic kick panel to body door opening. Pry this off and the panel should come out easily. Now you will have to remove the engine computer unit there, and probably a felt paper cover. You can then see the three hinge bolts.

The driver's side is almost identical except that you will have to remove teh fuse box. It is held in place by two philip head screws, top and bottom of the plastic fuse box. Of course, whenever working aorund electrical circuits, be sure to disconnect the negative battery terminal.

Good luck, it's not the hard, and pretty straightforward when look in there.

Mike






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.