The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Testing vacuum advance--how? 200 1988

If you can't find any leaks around the manifold, check the brake booster. I've seen advice here to pinch the line shut - don't know if that's a good idea with such a thick-walled tube, but I'll let others comment. If you do this and there's no vacuum change, the problem isn't there.

If you have no leakage evidence, all spark plugs are gapped correctly and look normal, and ignition timing is OK, I'll suggest a long shot: did you recently have the timing belt off and replace it? If it went back on with the cam sprocket one tooth off, ignition timing will be unchanged (on 240's with block-mounted distributor), but the cam will be off by 38 degrees, which would make the engine run VERY poorly, no power, low vacuum, etc.
--
Bob (son's 81-244GL B21F, dtr's 83-244DL B23F, 'my' 94-944 B230FD; plus grocery-getter Dodge minivan, hobbycar 77 MGB, and a few old motorcycles)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.