The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

A/F guage in... 120-130

I can't give you sepcific jet sizes for your motor, but the IPD kit will have pretty much what you need. It has to be done in this order, and with the motor at full operating temp:

Use the primary idle jet that lets you tune the mix screw for best/fastest idle with the screw 1-1/2 to 2 turns off its seat. This will be approximately 14:1 A/F, but tune it by ear. Readjust the idle speed and reset the mix screw until it all settles down.

Use the primary main jet that gives you 14:1 A/F under enough throttle that the secondary isn't opening yet.

Use the secondary main that gives you slightly richer mix -- 13:1, say -- under full throttle with both barrels open.

Use the smallest secondary idle jet (misnomer -- low-speed jet, it should be) that gives you good transition as the secondary opens.

Don't worry about the mixture going off-scale lean under decceleration.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.