The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Radiator still usable? Need fixit tips please. 900

Tonight I replaced the engine mount on my crunched car, only to find a slow drip out of the inlet neck on the radiator. I got out my 7mm socket and undid the clamp to see if it was the hose leaking or what, and the whole plastic neck came right off. This totally bums me out because its not even a part I had thought I would need to replace. Do you guys have any ideas of epoxies or glues I can use to create a new fill neck. The radiator itself is in great shape and it's a shame to total it out just because of this. However, I need some advice on what sort of glue to use that will withstand the heat and pressure of the application.

I'm thinking of finding plastic pipe (pvc?) and fitting it INSIDE the existing tube and then using a spacer or something to fit it into the hose.

Thanks for any advice.
--
'92 965







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.