|
I'm finally getting my upgraded wiring harness into my '86 with the rotten wiring insulation...
there seems to be an extra bundle with 3 connectors on it... 2- spade plugs (female) and 1- 2 prong male connector (gray connector with 2 rounded corners and 2 square corners)... it looks like it would fit into the connector on my alternator's voltage regulator but I didn't have anything hooked up there with my old harness.
______________________________________
wire colors are as follows...
2 prong gray male connector:
single red/white wire
single blue wire
first female spade plug:
2 blue wires (one blue goes to 2 prong connector)
other female spade plug:
single red/white (goes to 2 prong connector)
single black (this wire is much thicker gauge)
____________________________
I have an electric green book for the '86 which doesn't seem to have this bundle in its harness but I don't have the same green book for the '88 harness to figure this out with.
If any one can help me figure out where this goes or if I can just leave it off I would appreciate it!
thanks,
jack
--
'86 245, 282,000 mi., '87 760T 164,000 mi.
|