The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

flametrap is breathin' oil 200

Well I'm visiting my brother with the plan on getting his '89 running. Here is the problem. It would start and run for a few minutes and then blue smoke would start billowing from the exhaust and then it would die. It wouldn't start again unless the fouled plugs were cleaned. I was thinking the fuel pressure regulator but that didn't help when changed. Then we looked into the intake hose and it was full of oil. I pulled the flametrap, it was clean. Pulled the breather box, it looked okay. I laid a rag across the breather box openings on the block and plugged the open hoses and the car now runs fine with the exception of the excess oil its burning off through the exhaust. Could the breather box be plugged inside? Why would all this oil be pulled through the intake?

Thanks for any suggestions

Erich
Ottawa Ontario






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.