The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

LOST 700 1987

Okay for those who have done this i am extrely lost,

i am attempting to check my valv's on a b230ft

I have had a serious idle issue whaich has taken me down into the Head of the beast which only has 5k on it since rebuild.

when i checked for clearences i was not able to fit a .016 under the 2 and 4 on the 1 & 3 i was able to fit the .016 but only that, i figured these were in spec but could find nothing written anywhere on vavles being to close, so i need some help here are those readings okay?

i am in the process of tracking down a valve spring compressor tool so i can get these guys apart and at least replace the one husher. ive been throught the FAQ so before someone tries to flame me for not reading it ive been there multiple times.

some advise or assitance would be greatly welcome at this point.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.