The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

adjusting the door 120-130

I've got philip head screws holding the hinges in place, looks like the front fender will have to come off, in order to readjust that door.

No sill rust, it's pretty solid. One thing I noticed, the vertical seam under door (is this area also called rocker panel?) has been filled in, while seam is visible on right side. That kinda bugs me, and will need some attention.

There was extensive body/ metal work completed on the left side of car. Door came from another vehicle, as did the entire left side/ rear quarter (B pillar back to tail light). Interestingly enough, I noticed last night that the left taillight isn't fitting perfectly into the hole. Even with rubber seal around it, there is a gap.

That area has to be reworked anyways, since no horizontal seam is visible there either (immediately to right of tail light lens), and the new paint is already cracking in that area. Fun continues...






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.