The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Steering wheel spline interchangeability question 140-160

Yes, they are interchangeable (at least with early-ish 240s)

I have used a 244GL wheel in my '74 142 (and it also fits a '72 142) and also a '74 164E wheel which is in it currently.

One issue though - in both cases the padded rear part of the steering wheel (if that makes sense ?) fouls the plastic steering column shroud on the 140, so the shroud needs to be trimmed (or just left off completely !) to allow the wheel to fit. Not a major drama though - just take the Dremel to it...

I had the same issue with a MotoLita wheel which fitted a '72 perfectly but fouled the shroud on the '74.

The wheels have the same spline, but the shapelength of the back of the wheel is larger diameter so it wont fit into the standard shroud. I think the shoud must stick out further on the later model 140's compared to the earlier ones.

Hope this helps !

Dave






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.