The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Horn Again... 120-130 1967

Jeff,

As you figured out, the black is momentary ground from the horn ring. Brown should be 12V full-time, even with the ignition off.

I would disconnect the brown from both horns and check for 12V from the loose end of both brown wires to ground -- the chassis of the car, not the black wires. If that's not there, you've found the problem.

If you do have 12V there, check for ohms from the black wires to chassis ground -- it should be an open circuit (infinite ohms) until your assistant presses the horn ring. Then it should read close to 0 ohms. If that's not there, your horn ring is not making contact.

I'm not sure if it matters which terminal gets the black and which the brown, but you won't blow anything up experimenting. Do the left horn first with the right disconnected and try it both ways if both of the tests described above check good.

All the foam spacers do is keep the horns from shorting to ground.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.