The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Front & Rear Flange Seal Housings & Oil Pump Questions (B230FT) 700 1988

posted by  VOLVO760 on  Sat Aug 13 21:22 CST 2005
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hello....Do the bolts and or nuts, on the front and rear seal flange housings need to be torqued to a specific value? I have taken apart the oil pump and it is in very good condition ( the clearance between the internal gears is within specs and there is no abnormal wear on the housing & internal parts.)I have been advised to pack the internal cavity of the pump with petro jelly. So when the engine is started the first time after it's rebuild, the pump would be able to prime itself. Is this true, or should I reassemble the pump as is? Thanks...






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.