The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Idle Question.... Please Read 700 1990

Sounds like your CIS (Constant Idle System) is not working. This is a part of the 740 computer that regulates a small motor under the intake manifold than adds idle air when needed. Your motor may be shot, you could have a bad electrical connection or perhaps a hole in the hose between the motor and the intake manifold. There is also a serrated thumb wheel under the throttle control body for setting the idle speed. The way to set the CIS is to ground the red and white wire connector on the right fender, set the desired idle rpm with the thumb wheel and then remove the ground connector. This will activate the CIS and it will keep the idle 25-50 rpm above what you set. The CIS will also increase the idle when the AC compressor cuts in.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.