The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

240 Transmission 200 1987

Okay here we go again, Before you turn the car on, the Automatic (AW70)transmission goes in to gear, you can tell it is in "P", "N", etc. However when the engine is fired, you can slide it in, and the transmission appears to never start spinning, driveline never engages. I tried to the IPD Fluid flush, but with one of the tranny cooler line removed there is no fluid, when so far as to disconnect cooler lines completely from the tranny housing underneath the car, and with it running no fluid comes out. Any thoughts? I was thinking of using something to push the fluid in directly at the housing, seeing if maybe I can force it to push out the other port.

Either that, or does anyone know what manual tranny's will bolt up to a B230F? or is it just the Volvo M45/46/47?

Thanks again
Jim






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.