The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

AC Compressor Circuit Troubleshooting 900 1993

Hi, please confirm that basic checks have been done and the next step...(93 940NA Wagon, 155K)

AC compressor does not click on or engage. The on/off button does nothing(AFAICT). Found voltage going to the compressor - 12V with engine running. Found good ground at the back of the compressor at the ground wire terminal. Checked the resistance from the power wire through the compressor to ground, at 3.4 ohms, this agrees with the faq for good. An AC shop verified today the system is properly pressurized and no leaks. (was just evacuated and refilled 3 months ago) Drove it around, no change.
Shorted the pressure switch at the accumulator, no change. Found voltage at that switch jumping around at idle, from 5V to 10.5V between the hot terminal and ground. It was inconsistent.
What's the next step, is it time to check the solder joints on the dash control board? Thanks for your thoughts.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.