Volvo RWD 444-544 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2002 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

444 Heater Controls 444-544 1958

posted by  Keith756W on  Wed Feb 8 10:16 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Oct 11 13:27 CST 2009
[RELATED]

When I bought my 444 project the heater control module was just setting in place held mostly by the push pull cables. Now I'm working out heater stuff and need to figure out how the control module is supposed to be mounted.

There is a bracket on the back that is held to the module by three timmerman screws/nuts. The bracket has two holes that look like they would support it (Part 95368 Konsul for Draganordning). But that bracket lines up with thin air behind the dash, no matter how I mount it. Also, if I put it onto the module pointing down like it appears in the parts catalog it seems to interfere with the cables.

Can someone tell me how this module is mounted/held in place? I'm hoping I don't have to make up a bracket from scratch.

Keith
444 Project, Moline, IL






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 444 Heater Controls [444-544][1958]
posted by  Keith756W subscriber  on Wed Feb 8 10:16 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.