Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Problem solved! 200 1982

posted by  Caliwagon on  Wed Feb 22 16:39 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Aug 24 10:12 CST 2009
[RELATED]

Thanks to all (especially Mario)--I think the problem is finally solved!

I set the baseline idle this afternoon and simultaneously discovered that the accelerator cable was out of adjustment. I did end up raising the baseline idle significantly (it wouldn't even run in baseline mode the way it was set before).

I also replaced all the fuel injector seals. I'd bought some replacements years ago, but never put them in. I checked for leaks while I was in there, and found some. I have a hunch there may still be a vacuum leak somewhere else.

Anyway, I feel like I've got a whole new car! Thanks so much for all your help!

-John






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1982 K-Jet--idle questions re: CIS ECU and temp sensor [200][1982]
posted by  Caliwagon subscriber  on Sat Feb 18 14:29 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.