Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2008 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

broke a stud... ug. 120-130

posted by  122_Canadian on  Wed Apr 19 06:54 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Oct 20 07:51 CST 2009
[RELATED]

While a PITA, this is not that big a deal. I've had this happen (in fact my B18 had the exact same stud break). Soak it in your favourite penetrating oil and then get an easy-out bolt extractor (Sears, Snap-On, automotive supply etc.). Centre punch the stud and drill a hole into the stud, then insert the easy-out and voila - good as new. There will be a little loss of religion, but I've always had good luck with extracting broken studs/bolts. If you are still having some trouble (penetrating oil not doing the trick), warm the area (not the stud) with a propane torch (warm, not heat) and give it another try.

If this doesn't work, you'll have to pull the head and take it in for repair...but I'm sure you'll be able to get it out.

Good Luck.
Craig






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New broke a stud... ug. [120-130]
posted by  someone claiming to be blown-gasket  on Wed Apr 19 05:57 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.