Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2010 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Floor Pans 120-130

posted by  walrus3 on  Wed Aug 30 03:56 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Dec 2 14:20 CST 2013
[RELATED]

I used 16 gauge sheet arn, available at your local sheet metal shop.
Thinner will work (maybe 20 gauge) but I like 'em sturdy.
My guess is that most of what you are replacing is pretty flat or maybe
one bend (which your shop can do cheaply) or at the worst form it into a pan.
That is what I did - slotted the corners and welded them up on installation.
If you are recently into bifocals it may be a challenge to see what you are
doing. There is a pretty wide range of viewing distances involved, all
requiring sharp focus.
--
George Downs Bartlesville, Heart of the USA!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Floor Pans [120-130]
posted by  122s nut  on Tue Aug 29 17:12 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.