|
The HEPU brand pump sold by fcpgroton.com seems to get good reports here.
See the 700/900 FAQ for pump install tips. It's not just bolt off/bolt on. Requires partially bolting it on, then lever it up with big pry-bar to seal that leaky seal you have, then tighten scrws. Which means the gasket on the sliding face can take a beating as it slides. So read the FAQ.
Top right corner of these pages has a dropdown list, go to the FAQ.
In the FAQ scroll down to see the contents. Go to engine cooling.
Good luck with it!
--
Sven: '89 245 NA, 951 ECU, open-front airbox, E-fan, 205/65-15's, IPD sways, E-Codes, amber front corner reflectors. Wifemobile '89 245 NA stock. 90 244 NA spare, runs.
|