Volvo RWD S90-V90 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 S90-V90 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

S90: power window switches - how to remove, replace? S90-V90

posted by  volvo740gle on  Sat Dec 2 13:50 CST 2006
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 22 15:00 CST 2009
[RELATED]



Finally, I fixed it today.
A key to success is removing the plastic trim around the door handle, that is in a way when pulling the switches panel out.

Got 2 original Volvo switches for both front windows from FCP.


1. Unscrew two torx screws that are behind a plastic cover under the door handle
2. Take out the trim piece around the door handle by gently prying it out
3. Pull out the panel with switches, there is quite a bit of the length in the harness,to take them out of the panel, and make the rest of the job fairly obvious
4. Pull the switches block out by releasing two clips holding it
5. Unplug the connectors
6. Get the switches block out, take out the red plastic piece
7. Pry out the bad switch, and push a good one in place
8. Installation is reverse.


Step-by-step pictures with comments are at the flickr.com:

Hope they will be of some help to others.

-Michael
90' 740 16v 192K
98' S90 82K





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New S90: power window switches - how to remove, replace? [S90-V90]
posted by  volvo740gle  on Tue Nov 21 13:57 CST 2006 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.