If your door seals are visibly in OK condition, try this simple fix:

Get a short piece of 2x4 or similar wood block. Size isn't really important.

Close it in the door at the latch (striker plate). Push in, evenly, on the top of the door frame. You're looking to gently bend it in, maybe 1/8" tops.

Repeat for passenger side. Repeat for rear doors if it seems to be noisy there too.

Test drive to confirm any improvement. It usually helps!

Good luck with the car, and the noise, and the wife, etc...
--
::: Rob Bareiss, New London CT ::: 92 244 M47 212K ::: 90 745GL M47 275K ::: 90 745T AW71 213K ::: 90 745T Parts Car ::: 88 245DL SOLD! ::: 84 242DL Project ::: 70 VW Bus ::: 70 VW Pickup Project ::: 71 VW Notchback :::