Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2014 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Does M45 fit a B20? Quick answer needed! 140-160 1973

uid 4846's pic
posted by  JohnMc on  Wed Jan 31 01:06 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 07:42 CST 2014
[RELATED]

M45's did come from the factory attached to B20 motors, but only for a limited time during the 1975 240 production cycle. An M45 won't bolt to a bellhousing where an M40/41 was. It takes a special bellhousing, and those 1975 bellhousings are rare, ahrd to find, and fairly dear when you do. You could slice a B21 bellhousing apart and weld it back together with the engine slant taken out. Or just wait for an M40/41 to come along.
--
'63 PV544 rat rod, '93 Classic 245 + turbo






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Does M45 fit a B20? Quick answer needed! [140-160][1973]
posted by  Niel  on Tue Jan 30 19:08 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.