Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2017 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

cold/static timing 120-130

posted by  Ron Kwas on  Sun Feb 25 03:26 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 04:03 CST 2014
[RELATED]

Mr. Happ;

Nice Pic!

Joe has already given link to my ignition including static timing info page (thanks Joe!)...that should help.

...as far as assuring oiling of the cam, did engine builder put assembly lube onto camlobes?...probably...but I'd still pour some additional oil down the pushrod holes at least before first crankover...if you feel confident in pulling one spring on each valve, I suppose that cant hurt...befor first start-up, I'd preoil by cranking over engine with no plugs, no fuel, no ignition, until oil oozes from between rockers... then make everything right, and start her up, and enjoy those wonderful first smells coming off a fresh engine...Yahooo!

Cheers






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ANSWERED cold/static timing [120-130]
posted by  Mr. Happ  on Sat Feb 24 20:14 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.