Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 7/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

240 rear control arm bushing problem 200 1987

posted by  highmi240 on  Sun Jun 24 18:42 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jul 4 15:18 CST 2007
[RELATED]

Hi gang. I am replacing my control arm bushings. I will do just the rears. I have the control arm off the car. The problem is I am unable to remove the rear bushing from the control arm. It seems fused or welded or something. The inner bushing shell just won't come off the arm. I was able to pound out the bushing from the bracket, but the bushing remains solidly attached to the control arm. Could this have been welded or treated with a locktite compound?

Thanks in advance.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 240 rear control arm bushing problem [200][1987]
posted by  highmi240  on Sun Jun 24 18:42 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.