Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Stalling problem 200 1989

posted by  rstarkie on  Thu Sep 27 12:18 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:14 CST 2014
[RELATED]

Personally I don't think your problem sounds like the typical AMM failure but whatever you do DO NOT unplug or plug back in your air mass meter with the car running; doing so could very well fry it.

If the crank position sensor(located at the top of the bellhousing) has a yellow band around the black lead it would be a good investment to replace it as it is approaching 20 years of age.

Have you cleaned the throttle body? It is a very common neglected item that can make a big difference in hot starts and idles. Check the FAQ's at the top right hand drop down menu for instructions. Your throttle body and the 740/940 throttle body are the same and the cleaning procedure is the same.

Randy






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Stalling problem [200][1989]
posted by  someone claiming to be BBPOLKA  on Thu Sep 27 10:30 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.