Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2006

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B230F Engine Stand: How to Mount an Engine

posted by  lee on  Sat Oct 20 12:56 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jul 1 22:19 CST 2013
[RELATED]

Use the bellhousing bolts. Remove the flywheel before mounting it. If the engine will not mount without the spacers then use them, but in that case you will need to take a bolt to the hardware store (to compare threads) and purchase 5" longer bolts.

If you move the stand with the engine on it do so very carefully, and only do so with the engine head rotated either straight up or down to keep the weight centered. Don't ask me how I found this out ;-)
--
Lee 75 244 (80k original miles) 79 242 65 220 project






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B230F Engine Stand: How to Mount an Engine
posted by  Kreg_240  on Sat Oct 20 07:52 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.