If you have a Sony CD player installed now, then it doesn't matter if you have a built in amp. The Sony CD player likely has a built in amp.
If you have not yet installed the Sony CD player, then pull out the stock radio and look at the back. If you see a black round cable, then that is going to the amp. In that case, you should take apart the lower center console to access the amp and disconnect the rectangular connector which goes to the speakers. Then, buy a wiring harness from Crutchfield to convert that connector into bare wires (power and speakers) suitable for your Sony CD.
If you pull out the stock radio and don't see the black round cable, then you don't have an amp. The rectangular connector going to the radio would then carry the power and speaker wires. A harness from Crutchfield would connect to that, making it easier to connect the Sony CD.
You may also need an antenna adapter, but I don't think so. Good luck.
--
- FireFox31
|