Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2000 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Help on Door Hinge Replacement 200 1993

posted by  Trev29 on  Wed Mar 5 00:28 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 05:56 CST 2014
[RELATED]

The doors are a pain to adjust.

Try loosening the bolts just a tad, so that they are still gripping but with a bit of force allow the hinges to move. Close the door, push it into position and hope that when you slowly open it, it doesn't drop back down. Tighten bolts.

Try getting the height adjusted first, then loosen and adjust one hinge at a time to get flushness.

Jacking door or using 2X4s or bricks or whatever helps when it is open.

--
1980 245 Canadian B21A with SU carb but electronic ignition and M46 trans in Brampton, Ont.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Help on Door Hinge Replacement [200][1993]
posted by  Oleseahorse subscriber  on Tue Mar 4 08:16 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.