If your flashers dont work
maybe the flasher relay has died. or has a bad socket or loose/missing wire.
It is mounted in the main fuse block behind the ash tray.
Middle row third from left.
Give it a wiggle and tap with a screwdriver handle, see if
anything happens... maybe you can pop the cover and find a cold solder joint
that you can reflow with a solder iron or gun.
hint:
Be careful removing relays from the sockets , ie. try to pry them evenly from
both sides so you dont screw up the socket pins that are prone to get loose
AND BUGGY after gorilla's tear out the relays without a care.
Probably someone should fashion a tool to remove relays without damaging
the socket pins. (maybe they're out there?)

Bill