Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Modifications to engine mounts 200 1985

posted by  sdewolfe on  Tue Apr 15 03:37 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jan 31 05:56 CST 2011
[RELATED]


It seems reasonable to me that your idea would work. I think the most difficult part of such a modification would be trying to keep from getting cut by the sharp edge of the tin can. Hit it with some flat black paint inside and out; it should last a very long time.

Revision 2 to Plan B: paint the rubber with liquid tape electrical insulating dip. It comes in red if you really wanted to make the engine compartment spiffy.

-sd





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Modifications to engine mounts [200][1985]
posted by  Stickbuilder subscriber  on Mon Apr 14 13:41 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.