Volvo RWD 444-544 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2005 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Re-Ring Question 444-544

posted by  derek uk on  Thu Dec 4 10:41 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 12:33 CST 2014
[RELATED]

Measure diameter at right angles to the piston pin 12.5mm/0.49" from the lower edge of the piston.
Std pistons can be graded C, D or E. This will be stamped on the top of the piston.
C = 84.095mm/3.3108" D = 84.105mm/3.3112" E = 84.115mm/3.3116"
+0.020 = 84.615mm +/- 0.01mm / 3.3313 +/- 0.0004"
Oversize pistons usually have the oversize stamped on the top.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Re-Ring Question [444-544]
posted by  volvo65  on Thu Dec 4 08:59 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.