Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Setting depth, or different width seals? .... 200

posted by  yama on  Wed Dec 24 00:45 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 25 05:26 CST 2013
[RELATED]

Based on eEuro's site it looks like the orange Elring is 10mm wide in contacts the crank surface 3mm further back then the stock gray one which is 7mm wide. The point I was trying to make is if you need to contact the crank 3mm from the original contact ring unless you have a tool to set the depth precisely get the orange Elring has opposed to the stock gray one.




http://www.eeuroparts.com/Main/PartDetail.aspx?id=6842160A


http://www.eeuroparts.com/Main/PartDetail.aspx?id=6842160B






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Front seals: Volvo (gray) vs Elring brand (orange)? Which is better? .... [200]
posted by  Ken C subscriber  on Mon Dec 22 17:30 CST 2008 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.