Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Any luck with the engine Kit? 200

posted by  volvo245kit on  Thu Mar 26 13:14 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Apr 30 20:54 CST 2011
[RELATED]

Well, to get up to date, I have replaced the intank pre-pump with the new one I got from IPD. While I had the pre-pump out I rigged up my 12V power supply with

alligator clip leads and hooked it up to the old pump and very carefully lowered it into the tank and sucked most(if not all)of the old fuel out. I

rigged a hose to the outlet and fed that into 5 gallon gas cans. I've also put 5 gallons of fresh premium gas in the tank. After that I was going to downjack

the car off of the jackstand and I noticed that one of the rubber donuts that hold the front muffler in place was broken. Fortunately, I have a spare. So I

went to install it and while doing so I found that the bracket that holds the donut at the car end was loose. Upon further investigation I found that the


bolt that holds that the hole is stripped so I have to drill it up and retap it to a larger size. It snowed today here so I wasn't really motivated to go

out in the cold to deal with it. I'll keep you posted. Thanks, Charles






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New What years had the flathood that is compatible with my '82 245? [200]
posted by  volvo245kit  on Wed Mar 25 16:10 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.