Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

This will be the offset .... but what about the diameter? 200

posted by  Ken C on  Fri Apr 3 00:08 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 11:39 CST 2014
[RELATED]

On the inside (backside?) there is usually an embossed or stamped symbol "ET" followed by a two-digit number -- for example, "ET20" or "ET25" -- that's the offset. Or else there's a full wheel description, such as 6.5x16x25, the last two digits being the offset.

Your 940 (if the early version), and 740's, had a 25mm offset, whereas all 240's have a 20mm offset; but this is perfectly interchangeable. I use Hydra 16x6.5 inch (offset 25mm) on my 240s.

More important, if you're considering 240 wheels, is their diameter -- many 240 wheels may not be big enough to clear your brake caliper.

Good luck.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How do I know the wheel offset? [200]
posted by  soundmiami subscriber  on Thu Apr 2 15:50 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.