|
I pulled fuse six, and seem to have stumble on a completely seperate issue. When I put the fuse back in, it would not start at all. It cranked and cranked, but wouldn't fire. I have had this problem once before, i found that the outboard (closest to the door) terminal is loose. I wiggled the terminal and tried again. It fired right up and ran for a few mintes before the CEL came back on. This time, when I retrieved the codes, there was only one, 1-1-3. As I said in a previous post, I found injector one to be a possible culprit. I am going to read up in the FAQ's about injectors. I really didn't find much help in the Bentley manual, though I've only been looking for a day or two.
|