Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2001 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Random B18 engine anomalies 140-160 1968

If blanking the PCV doesn't make that much difference, then check float levels are correct - about 1/8 to 3/16 inch when inverted, and NOT compressing the spring in the needle if one is fitted. Also check that the needles are inserted so that the shoulder is flush with the bottom of the piston.
Worn shafts will cause poor running, but that as bad as you describe.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Random B18 engine anomalies [140-160][1968]
posted by  drj434343 subscriber  on Fri Jun 26 12:14 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.