Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2010 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

M41 140-160

posted by  122 and 940 and too many on  Fri Jul 10 04:49 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Apr 25 13:12 CST 2011
[RELATED]

The items you need are the gearbox crossmember, which is different for an M40 and an M41 on a 140. The existing one can be altered though with a spot of creative welding.

You also need the shorter propshaft, your existing one can be altered and re balanced.

You may have a mismatch on the output flange, there are big ones and small ones depending on the spec of the car and what the M41 came out of.

You need a longer speedo cable.

Wiring and switch can be created.

Bell housing and flywheel can be re-used, providing you're starting with an M40.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New M41 [140-160]
posted by  rawits  on Fri Jul 10 03:22 CST 2009 >
  • New M41 [140-160]
    posted by  walrus3 subscriber  on Fri Jul 10 04:06 CST 2009 >
  • New M41 [140-160]
    posted by  122 and 940 and too many  on Fri Jul 10 04:49 CST 2009 >
  • New M41 [140-160]
    posted by  alschnertz subscriber  on Fri Jul 10 05:02 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.