Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2014

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Will a Bernzomatic work for broken off bolts? Possibly!!!

posted by  Son Of Bonzo on  Wed Jul 29 08:47 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Feb 23 15:39 CST 2014
[RELATED]

Hi all,
So 36 hours later and half a can of PB gone, I finally got the darn bolt out. Took a combination of heat, ( around the bolt, but not directly on it) AeroKoil overnite each nite, tapping the screw. Then in the end I found a good smaller pair of vice grips and literally hurt my hand clamping down. Then, as I was twisting on the thing after heating the area around it, and showering it with PB as I turned, it started loosening up. Back and forth, back and forth, took awhile, but got it done.
In the end was it the hear? or just a good grip and letting the penetrating oil do the work, well who knows, I'd like to think it was a combination of all three.
Thanks
Cp






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Will a Bernzomatic work for broken off bolts???
posted by  Son Of Bonzo  on Mon Jul 27 07:04 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.