Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2004

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Fuel guage DYI?

posted by  rstarkie on  Wed Dec 23 03:26 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:14 CST 2014
[RELATED]

You might do better by going to a local established hardware store. The person helping you at the big box store is perhaps a sports management major trying to make some beer money over the holidays.

The tubing on the rail piece is 8mm and the compression fitting you need is 5/16"... as luck would have it 8mm = 5/16".

Do not see in this set up an opportunity to install a fuel pressure gauge on the dash- this is for testing purposes only. Make sure you use fuel grade hose and you will feel more comfortable working out of doors with an extinguisher at the ready. I have never had a problem with this homemade gauge but we don't want to get a report on you via the evening news....

The end of the gauge setup that has the female fitting (at the end of the hose) connects to the fuel rail on the car while the other end connects to the supply line.

Randy






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Fuel guage DYI?
posted by  mmal231294  on Wed Dec 23 01:05 CST 2009 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.