Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2022 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

got her running 200 1988

Dave,
What wiring diagram are you using?

The headlight relay may be bad. Suggest you start a new thread on the headlights, if they are still failing. (You do have the ignition on, right?)

"and a spark later and the pump started"
You mean there was a spark at the jumper that wasn't there before?

"also can't get intank pump running just the main"
You mean with the 4-6 jumper? Or when running? Or both?

"Also i have no power to the #5 fuse"
On your car (they vary by year and world market) #5 isn't used. Neither is #6 although its input side is powered (6-10 always hot, remember?)

Power path to tank pump is:
Battery=>25A fuse=>Fuel relay 30(in)=>Fuel relay 87-2(out)=>4-pin plug under glovebox**=>Fuse#4 left(input)=>thru fuse=>Black wire at 2-pin plug feeding pump.

** This plug also carried Main pump voltage

"Could my problem be the ignition switch or the computer?'
Anything is possible. The switch maybe, FI computer, hardly likely.


--
Bruce Young, '93 940-NA (current), 240s (one V8), 140s, 122s, since '63.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New fuel pumps [200]
posted by  zeeya  on Thu Mar 18 10:21 CST 2010 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.